These kits include a pair of auto-rate Ethernet extenders, using a standard 2-/4- or 8-wire connection, which simplifies your life and provides cost-effective network extension by enabling you to make the most of your pre-existing twisted-pair infrastructure.
You’ll be able to connect remote LANs across distances and at speeds previously unheard of. An auto-rate feature ensures that you achieve the highest possible speed on each connection.
It’s easy to use, too. Plug-and-play means that you’ll be up and running in seconds, and the built-in MDI-X works with either straight-through or crossover cables.
The pair autosenses the data rate up to 45.6 Mbps at a distance of 1450 m (8-wire version) to provide reliable broadband connectivity with full-duplex symmetric rates, with lower speeds at longer distances of up to about (8.4 km). See distance charts under technical specifications.
Compliance — FCC Part 15A; EMC Directive 89/336/EEC; Low-Voltage Directive 73/23/EEC
Data Rate —
2-wire (LB522A): 11.4 Mbps at 1.4 km (0.8 mi.), full-duplex maximum
4-wire (LB524A): 22.8 Mbps at 1.4 km (0.8 mi.), full-duplex maximum
8-wire (LB528A): 45.6 Mbps at 1.4 km (0.9 mi.), full-duplex maximum
Distance — 8.4 km (5.2 mi.) maximum
LAN Protocols — 802.1d transparent bridging; 2K MAC address learning bridge
Management Interface —
Web-based GUI;
CLI for local and console access;
password protected;
SNMPv1/v2 (RFC 1157/1901/1905) agent and MIB (RFC 1213/1493;
software upgradable via Web browser / TFTP
Modulation — TC-PAM 32; 16
MTU Support — 1792 bytes
Operation — Ethernet: Full- or half-duplex
QoS Support —
Rate limiting, rule-based/port-based; traffic classification based on port/802.1p/DSCP;
WRR (weighted round robin)/SPQ (strict priority queueing) scheduling algorithm Rate limiting, rule-based/port-based;
traffic classification based on port/802.1p/DSCP;
WRR (weighted round robin)/SPQ (strict priority queueing) scheduling algorithm
VLAN Support — IEEE 802.1q VLAN Tagging; Port-based VLAN, up to 4000 VLANs. VLAN Stacking (Q-in-Q)
Interface — Ethernet: 10BASE-T/100BASE-TX
Connectors —
Ethernet: (4) 10BASE-T/100BASE-TX, autosensing, with half- or full-duplex operation;
Local/remote interconnect link: (1) shielded RJ-45;
Management: Web: (1) shielded RJ-45; console: (1) shielded RJ-45;
Power: (1) Universal Input (UI);
Indicators — Power, Alarm, Diagnostic, (4) WAN link, (4) Ethernet Link; (4) Ethernet 100M
Power — 90–240 VAC, 50–60 Hz, universal power supply;
Size — 4.8H x 19.5W x 16.8D cm (1.9"H x 7.7"W x 6.6"D)
Weight — 1.3 kg (2.9 lb.) not including the power supply
Environmental —
Operating temperature: 0 to 50º C;
Storage temperature: -40 to +85º C;
Distance on 24 AWG (0.5 mm):
2-Wire (LB522A-KIT-R2)
Line Rate – Distance
192 kbps: 10.4 km
1 Mbps: 9 km
4.1 Mbps: 4.9 km
8.2 Mbps: 3 km
15.3 Mbps: 1.2 km
4-Wire (LB524A-KIT-R2)
Line Rate - Distance
386 Kbps: 10.4 km
2 Mbps: 9 km
8.2 Mbps: 4.9 km
16.4 Mbps: 3 km
30.6 Mbps: 1.2 km
8-Wire Standard (LB528A-KIT)
Line Rate - Distance
768 kbps: 8.3 km
1024 kbps: 7.5 km
2048 kbps: 6.7 km
3072 kbps: 6.4 km
4096 kbps: 6.2 km
5120 kbps: 5.8 km
6144 kbps: 5.6 km
8192 kbps: 5.2 km
9216 kbps: 5.0 km
15360 kbps: 3.8 km
18432 kbps: 3.7 km
22784 kbps: 3.3 km
Carrito de compra
Ingresar
Contáctenos
