...on 75-ohm BNC coax cable for transmission — the same cabling traditionally used for analog video communications. • SDI interfaces are standardized by the Society of Motion Picture and Television Engineers (SMPTE) and include: standard-definitio...

...means the interconnect cable requires less board space. • Thinner cables • Serial ATA also uses thinner cables (no more than 6.3mm wide) that are available in longer lengths (up to 1 metre) as well as an improved connector design to reduce crosstal...

...Possible causes: • Bad cable or cable that’s too long, causing either the video signals or EDID/HDCP control signals not to be transmitted properly. Make sure that you use quality, high-speed HDMI® cables—they don’t even have to be expensive ones—o...

IP-Based Distribution • IP-Based A/V Distribution • IP-based distribution technologies use transmitters and receivers to extend signals over a TCP/IP network (a LAN or even a WAN, for instance). Oftentimes, they’re called IP streamers when use...

...etc. S/PDIF is based on the professional AES3 interconnect standard. • S/PDIF signals are carried over two types of cables. The first is a 75-ohm coaxial cable with orange RCA connectors. The second is a fiber cable with TOSLINK connectors.

...high-fibre-count ribbon cable. It’s used in high-density fibre applications. • The MU connector • resembles the larger SC connector. It uses a simple push-pull latching connection and is well suited for high-density applications. • Learn more: • Fla...

...CatX infrastructure cable and can offer extensions to distances of up to 300m. • VGA based Multimedia distribution products are similar in many ways to KVM extenders. They extend the output from a computer to a VGA monitor or projector located a...