ServSwitch CX con Modulo de acceso DisplayPort

Each Server Access Module (SAM) is connected back to the server ports of the ServSwitch CX using inexpensive CATx cable for a simple and cost effective installation. These SAMs work with ServSwitch CX, CX IP, CX Uno, CX Uno IP, and CATmix extender receivers.

Place your servers up to 50 m away from the switch. The “Keep alive” feature powers module even if switch loses power. All Server Access Modules are flash upgradable for future requirements.

SAMs are available for VGA, Displayport, PS/2, USB, and Sun servers, with or without audio. Choose the appropriate Server Access Module (SAM) for each server you want to connect. You can mix and match servers. Order one unit for each server-to-switch connection.

Distance (Maximum) — 50 m (164 ft.) with ServSwitch CX 4-User; 10 m (32 ft.) with ServSwitch CX Uno and CX Uno with IP
Connectors —
CPU: KV1408A: (1) Display Port M; KV1409A: (1) Display Port M;
both;
(1) USB Type A M; (1) 3.5-mm M; KVM Switch: (1) RJ-45 F
Size — 8.9H x 2.8W x 4.8D cm (3.25"H x 1.1"W x 1.9"D)

KV1408A
(1) Display Port with Audio and USB Server Access Module

KV1409A
(1) Mini Display Port with Audio and USB Server Access Module