controlador de línea Async RS232 sobre CATx - DB9 con señales de control al bloque de terminales, 230V

These CATx Line Drivers enable the user to place a receiving device up to 1200m from the sending device.

The local unit has a DB9 female connector and is configured as a DCE device; the remote unit has a DB9 male connector and is configured as a DTE device. This allows the local/remote pair to function as a long extension cable between two RS-232 devices. There are no user-configurable settings. These units pass TXD, RXD, RTS, and CTS signals to allow application to use hardware handshake signals if necessary.

Approvals — CE, RoHS, UL
Cable Requirement — CATx
Connectors —
Local unit: (1) DB9 F (DCE), (1) RJ-45, (1) power jack;
Remote unit: (1) DB9 M (DTE), (1) RJ-45, (1) power jack
Distance — 1219.2 m (4000 ft.) maximum
Interface— RS-232
Operation — Asynchronous, full-duplex
Power— Input: 100–240 VAC, 47–63 Hz; Output: 5-VDC with Universal Plug Kit; PSE Approved
Speed — 250 kbps maximum
Dimensions — 2.0H x 4.3W x 8.1D cm (0.8"H x 1.7"W x 3.2"D)
Weight — 0.9 kg (2.0 lb.)

(1) local unit
(1) remote unit
(2) power supplies